WARNING: This product can expose you to chemicals including nicotine, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Maxxximize Your Cloud Experience
Open up the entire wide world of dabbing for your pack by enlisting the help of our Wulf Mods Evolve Maxxx 3 in 1 Kit! The Maxxx has three distinct operating modes that include the wax pen mode for on the go use, nectar collecting mode for raw concentrate enjoyment, and finally dab rig mode for adaptability. A trio of distinct temperature options accompanies the 3 operating modes (3.2v, 3.7v, 4.2v) the Maxxx can accommodate a variety of cloud preferences.
For both the Wax Pen and Dab Rig Mode, the Evolve Maxxx comes with a choice of two different coils with the regen triple quartz coil and the dual quartz coil. This allows you to mix and match pieces until you find your perfect Maxxx set up for each concentrate!
To make your life easier, the Maxxx employs the use of QTC technology, an airflow valve, and even has a silicone jar built into the very base of the device itself. Additionally every Evolve Maxxx comes complete with a wax loading tool and quick charging cable to make sure you can start ripping clouds as soon as it arrives. Take a look at the 9 available color options for the Evolve Maxxx to find which one fits your style to start dabbing the Wulf Mods way.
Loading The Evolve Maxxx In Wax Pen and Dab Rig Mode
To load your Evolve Maxxx in either Wax Pen or Dab Rig mode make use of the included tool to scoop out a small out of your concentrate and apply it to your chosen coil. After this place the cap on top of your chosen coil to seal the materials in.
Loading The Evolve Maxxx In Nectar Collector Mode
With Nectar Collecting Mode there is no loading - instead you simply hover your nectar collecting tip while hot over the concentrate materials to start vaporizing them.
Using Your Evolve Maxxx In Wax Pen Mode
To start using Wax Pen Mode begin by first selecting which coil you would like to use, either the triple or dual quartz coils. Then screw the chosen coil into the base and attach this newly joined piece to your mouthpiece. After this, take the Mouthpiece and attach it to the body of the Evolve Maxxx. Once fully assembled you are ready to start dabbing!
Using Your Evolve Maxxx In Dab Rig Mode
For Dab Rig Mode, first you must choose between the triple and dual quartz coil options. Once selected take your desired coil and screw it onto the base. Then attach the airflow piece to the base with coil before screwing all of that onto the body of the Evolve Maxxx.
After this is completed attach the glass adapter and gently place the Dab Rig Mode Evolve Maxxx into your desired rig or water piper to start vaping.
Using Your Evolve Maxxx In Nectar Collecting Mode
To get started with Nectar Collecting Mode first screw the Mouthpiece onto the top of your device. After this is done, screw the base on the other side of the battery before finally attaching the nectar tip to this same end by screwing them together. Once assembled, you will be ready to commence nectar collecting!
Adjusting The Evolve Maxxx’s Temperature
To swap between the trio of different temperature options on the Evolve Maxxx, press the power button 3x times in a row to cycle to the next level. The LED light will shift to indicate which level you are at, they are as follows: 3.2v White - 3.7v Blue, 4.2v Green.
Pre-Heating Your Evolve Maxxx
To preheat your Evolve Maxxx press the power button twice (2x) in quick succession to start the 15s warming countdown. To stop the preheat early, press the power button another 2 times in a row and it will cease warming. When you are ready, hold the power button as normal and inhale for an extra potent cloud of concentrate.
How To Charge The Evolve Maxxx
To charge your Evolve Maxxx make use of the included charging cable. The first time you charge your Evolve Maxxx make sure to leave it plugged in for a full 2 hours, this is to do an initial refresh of your device. Every single time after that, never charge the Evolve Maxxx for longer than 1 hour at a time. This is to improve battery lifespan and avoid other issues.
How To Clean the Evolve Maxxx
To clean your Evolve Maxxx make sure the device is completely turned off before disassembling all of the components from each other. From here you can use a cloth to gently clean the various components of any dirt or material build up.
For the coils, nectar collecting tip, and mouthpiece components we recommend making use of a q-tip or swab that has been lightly dampened with isopropyl alcohol to scrub any wax material build up from these pieces.
What’s Included:
- (1) Wulf Evolve Maxxx 3-in-1 Battery
- (1) Regen Triple Quartz Coil
- (1) Evolve Plus Dual Quartz Coil
- (1) 14mm Glass Connector
- (1) 10mm - 19mm Adapter
- (1) Silicone Jar
- (1) XTAL Tip Atomizer
- (1) Charging Cable
- (1) Loading Tool
WARNING: Do not charge with a powerbank of 5V or higher. Do not charge in your car. Do not overcharge or use any other charging cable other than what comes with your battery. Failure to follow these instructions could result in battery damage and frying of the internal system.
You may also like
Recently viewed
